Your location£ºhome > News > Product info >

JJX140 down from the box

2016-06-28 07:12      Click£ºtimes
JJX140 down from the box using multi-stage gear transmission having an input shaft connected through the hanging apparatus and the transmission input shaft, the input shaft on the opposite side with coaxial with the output shaft, a car power outlet. Between the transmission and the drop from the input shaft is provided with a means to hang together, it can be implemented in case the engine does not stall decline from the box is not running, in order to reduce the frequent start and turn off the engine.
JJX140 down from the box front and rear ends of the output shaft, has to be linked to the input exit pick, respectively, by the universal transmission device connected to each drive axle, by detaching and attaching means can be realized while hanging around together or disengaged, but also achieve front and rear axles together or hang separately disengaged.
JJX140 drop down away from the box with five axes, a first axis and a third axis, using aligned parallel in the same plane, the third axis and the fifth axis is also used in the same plane are arranged in parallel, but some two dihedral plane angle, so that is to ensure that the engine and transmission output axis sedan car center in the horizontal plane of a large drop from the large bias contradictory needs, but also to ensure.

JJX140 down from the tank has a large torque from the big drop is an important component of the power transmitted on the job under the locomotive and car repair large drill.

 

JJX140 down from the box main technical parameters:
Model: JJX140
Maximum output torque: 14kN.m
Transmission ratio: i = 1: 1
Maximum input speed: 2,100rpm
The first axis and the fifth axis horizontal offset: 750mm
The first axis and fifth axis vertical falling distance: 870mm

TAG£º