Your location:home > News > Product info >

M3/65-E-S02 M3/105-E-S02 M3/205-E-S02 M3/305-E-S02

2016-09-10 22:18      Click:times

2极 - 3000/3600 rpm

 

代码

型号 代码 型号
600467 M3/65 - E - S02 600465 M3/105- E - S02
600462 M3/205- E - S02 600461 M3/305- E - S02


Power Supply
Three phase 690V - 50Hz/60Hz, 48V
Frequency converter can achieve 20Hz to the rated frequency of regulation
The number of poles
There are 6 commonly used, the other is very custom
In accordance with the following provisions of Europe
Low voltage 89/336/CE; electromagnetic compatibility 73/23/CE
Refer to the following standards
EN600034-1, EN50081-1, EN50081-2, EN50082-1, EN50082-2
performance
In the maximum eccentric force and the maximum power supply, can be continuous operation, but also can be interrupted. It depends on the type of vibrator and operating environment. For more information, please contact our technical department.
centrifugal force
Max up to 50000Kgf (490KN).
Output centrifugal force adjustment range 0 to 100%
Mechanical protection
According to EN60529, IEC529 regulations: IP66
Earthquake protection
According to EN50102, IEC68 regulations: IK08
Insulation grade
F Class (155 C); H Class (180 C) to be customized
Heat resistance
Manufacturing process using drip plastic forming
ambient temperature
From -30 to +40 degrees Celsius, the use of other environmental temperature with the manufacturers to confirm
A thermal protector
The standard vibrator is 130 DEG C (DIN44081-44082) thermistor thermistor for temperature protection or other anti frosting heater, please contact with the factory.
install
In any position can be installed, two vibrators connected by joint coupling
lubrication
All have been filling in vibrator factory lubricating oil, under normal conditions without the addition of lubricating oil, but under heavy conditions, frame size 35 and above models need to add the lubricating oil and the vibrator
Junction box
For fixing an electrical connection wire, a terminal with a special shape can be provided for fixing the power cord to avoid joint loosening.
Electric machinery
The three-phase asynchronous motor, designed to meet the vibration of the machine when starting the required maximum starting torque and torque curve design, frame size to AF33, 35 of the vibrator are vacuum injection molding process, vibrator frame more by plastic molding manufacturing.
Shell
Vibrator shell frame size 35 below the high strength Aluminum Alloy, frame size greater than using ductile iron 35, special shape design patent is beneficial to heat radiation, under normal conditions, full load operation when the temperature is much lower.
Bearing base
Ductile iron or gray cast iron.
Bearing flange flange Bearing
Ductile cast iron. The geometric structure of the flange can transmit the load to the outer shell.
Bearing Bearings
Special customization, tailored specifically for Italvibras, is applicable for both axial and radial loads.
Motor shaft shaft Motor
Aluminum alloy constant temperature quenching treatment, can reduce the stress. One end shaft extends out to connect the coupling.
Eccentric block weights Eccentric
The centrifugal force can be continuously adjusted, and the centrifugal force is indicated by the percentage of the centrifugal force. A patent system called ARS (patent number: M098A000194) can prevent the adjustment error.
Eccentric block end cap covers Weight
The Aluminum Alloy material from the shaft end of the eccentric block cover is divided into two pieces, so that can open the cover even two eccentric vibrator are connected together
Paint Painting
Spray salt test with epoxy resin powder for 500 hours at 200 C.
TAG: